+91 - 90110 19090
Testing Facilities
Engine Testing

We have Designed and Manufactured Exhaust Silencers from 3 KVA to 3250 KVA for CPCB – II Norms, Tractors & Off- Highway Equipment’s and all the silencers are Tested and Results are found satisfactory on following Engines.



Sr. No. Engine Manufacturer
1. Kirloskar Oil Engine Ltd. (KOEL) Engines.
2. Ashok Leyland Engines.
3. Doosan Engines.
4. Cooper Corporation Pvt. Ltd. (CCPL) Engines.
5. Mahindra & Mahindra (M&M) Engines.
6. Kohler India (Lombardini) Engines.
7. Greaves Cotton Engines.
8. Weichai Engines.
9. Volvo Engines.
10. Eicher / TMTL Engines.
11. Perkins Engines.
12. Escort Engines.
13. Cummins Engines.
14. Caterpillar (CAT) Engines.
15. Mitsubishi Engines.
16. TATA Engines.

Inspection and Testing Facilities

Inspection Equipment

Sr.

Description

Qty.

1 Vernier Caliper 0 - 300 mm 8
2 Vernier Caliper 0 – 600 mm 2
3 Digital Vernier Caliper 0 – 300 mm 3
4 Micrometer 0 - 25 mm 2
5 Digital Micrometer 0 – 25 mm 2
6 Height Vernier 0 – 1000 mm 3
7 Depth Vernier 0 – 300 mm 2
8 Inside Caliper 2
9 Outside Caliper 2
10 Thread Gauge 2
11 DFT Meter 0 – 1250 Microns 2
12 Viscosity B4 Cup 2
13 Cross Hatch Tester 1
14 Muffle Furnace 1
15 Salt Spray Chamber (Fog Chamber) 1
16 Slip Gauge 2
17 Inspection Fixtures of Various Specifications 110+

Testing Facilities (In-house)

• Every Raw Material lot is Tested from External facility for Chemical and Physical properties as Per Specified Defined Frequency.
• Each Silencer is Manually Puncture Tested at 1.0, 1.5 & 2 Kg/m2 for Leakage at Welded Joints and then cross checked on Fully Automatic Leak Tester before Painting.
• Paint Dry Flim Thickness (DFT) of Each Silencer is Inspected at 8 Different points.
• Adhesiveness of HR Paint is Tested for Each lot using Cross Hatch Scrubber.
• Heat Resistance of HR Paint is Tested for Each lot using Muffle Furnace.
• Corrosion test for HR Coated Surfaces using Salt Spray Chamber.


 
 
• Every Raw Material lot is Tested from External Facility for Chemical and Physical Properties.
• Each Silencer is Puncture Tested at 1.0, 1.5 & 2 Kg/m3 for Leakage at Welded Joints before Painting.
• Paint DFT of Each Silencer is Inspected at 8 Different points.
• Adhesiveness of HR Paint is Tested for Each lot using Cross Hatch Scrubber.